Для любителей экспериментов.

[densen]

Этот лог я снял,когда делал дамп с нового (рабочего) octagon sx88
посмотрите пожалуйста.

Сегодня:

boot.exe -b "C:\Denys_h265_restore_2017_09_12\boot_file\forum. u2c.tv_denysH265.boot" -d COM9 -c "serialdump 0x00000000 0x00200000 'C:\\Denys_h265_restore_2017_09_12\\res_neu.bin'"

Found serial: COM9
wait ROM request... please power on or restart the board...

write size 101404 byte .................................................. end
data transmit ok.
SPINAND: read id ok! 0xd5, 0x11, 0x00!

SPINAND: 0xd5, 0x11, EM73C044

use default bad block pattern 2048

spinand_scan_bbt: start

spinand_scan_bbt 1

scan eraseblock 99 at 0xc60000

Bad eraseblock 128 at 0x1000000

scan eraseblock 199 at 0x18e0000

scan eraseblock 299 at 0x2560000

scan eraseblock 399 at 0x31e0000

scan eraseblock 499 at 0x3e60000

scan eraseblock 599 at 0x4ae0000

scan eraseblock 699 at 0x5760000

Bad eraseblock 768 at 0x6000000

scan eraseblock 799 at 0x63e0000

scan eraseblock 899 at 0x7060000

scan eraseblock 999 at 0x7ce0000

Bad eraseblock 1023 at 0x7fe0000



warning! partition table no found, use default partition table:

Partition Version : 102

Partition Count : 0

Write Protect : TRUE

CRC32 Enable : TRUE

Table CRC32 : FFFFFFFF

================================================== ============================================

ID NAME FS CRC32 START TOTAL_SIZE MAIN_SIZE USED_SIZE Use% RES_SIZE

================================================== ============================================

----------------------------------------------------------------------------------------------





GxLoader v1.9.6-x 20170220



cpu family : CSKY

chip model : gx3211

board type : 6611-dvbs2

memory size : 128 MB

Flash type : EM73C044

Flash size : 132 MB

cpu freq : 594 MHz


memory freq : 533 MHz


serialdump 0x00000000 2097152


Write from flash address: 0x0, len: 2097152


start to recv data from stb board, please wait 209s.
100%
recv all ok. unit = 20972, count = 2097152. will write to file C:\\Denys_h265_restore_2017_09_12\\res_neu.bin

Completed.

HyperTerminal:

Decompress kernel ...1F 8B 08 00
ok
The total boot time is: 2 s (2356 ms)
[ 0.000000] Linux version 2.6.27.55 (root@localhost.localdomain) (gcc version
4.5.1 (C-SKY Tools V2.8.01-gx-sp6(UClibc), ABIV1, B20151004) ) #37 Wed Jul 4 16
:36:06 HKT 2018
[ 0.000000] CPU revision is: 0x102816a2 (CK610MA)
[ 0.000000] Determined physical RAM map:
[ 0.000000] User-defined physical RAM map:
[ 0.000000] memory: 08800000 @ 10000000 (usable)
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00010000 -> 0x00018800
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0x00010000 -> 0x00018800
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
es: 34544
[ 0.000000] Kernel command line: mem=136M videomem=80M fbmem=40M console=ttyS
0,115200 init=/init root=/dev/mtdblock3 rootfstype=squashfs rw mtdparts=spi_nand
:128k@0m(BOOT),4992k@128k(KERNEL),5m@5m(UPG),16m@1 0m(ROOTFS),16m@26m(USER),1m@42
m(LOGO),85m@43m(DATA)
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.020000] Memory: 134328k/139264k available (2339k kernel code, 4752k reser
ved, 961k data, 80k init, 0k highmem)
[ 0.020000] SLUB: Genslabs=12, HWalign=16, Order=0-3, MinObjects=0, CPUs=1, N
odes=1
[ 0.020000] Calibrating delay loop... 593.10 BogoMIPS (lpj=2965504)
[ 0.250000] Mount-cache hash table entries: 512
[ 0.250000] net_namespace: 288 bytes
[ 0.250000] NET: Registered protocol family 16
[ 0.250000] gxchip_init: 3211.
[ 0.250000] GX3XXX: Initialising architecture
[ 0.280000] SCSI subsystem initialized
[ 0.280000] usbcore: registered new interface driver usbfs
[ 0.280000] usbcore: registered new interface driver hub
[ 0.280000] usbcore: registered new device driver usb
[ 0.300000] NET: Registered protocol family 2
[ 0.390000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.390000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.390000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.390000] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.390000] TCP reno registered
[ 0.420000] NET: Registered protocol family 1
[ 0.420000] NTFS driver 2013.2.5 [Flags: R/W MODULE].
[ 0.420000] fuse init (API version 7.9)
[ 0.420000] squashfs: version 3.4 (2008/08/26) Phillip Lougher
[ 0.420000] squashfs: LZMA suppport for slax.org by jro
[ 0.420000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
54)
[ 0.420000] io scheduler noop registered
[ 0.420000] io scheduler anticipatory registered
[ 0.420000] io scheduler deadline registered
[ 0.420000] io scheduler cfq registered (default)
[ 0.970000] Nationalchip IRR Driver
[ 0.980000] input: goxceed remote control as /class/input/input0
[ 1.010000] Nationalchip gpio Driver
[ 1.010000] Serial: 8250/16550 driver4 ports, IRQ sharing disabled
[ 1.020000] serial8250.0: ttyS0 at MMIO 0x403000 (irq = 15) is a 16550A
[ 1.020000] console [ttyS0] enabled
[ 1.030000] serial8250.1: ttyS1 at MMIO 0x413000 (irq = 26) is a 16550A
[ 1.050000] loop: module loaded
[ 1.060000] GX MTC Driver, (c) 2015 NationalChip Technologies
[ 1.070000] synopGMAC_attach PhyBase: 1.
[ 1.070000] synopGMAC=: napi tx_desc rx_desc mac_irq mac_addr rmii_flag mac_f
b phy_addr.
[ 1.080000] napi: 1.
[ 1.080000] check rmii_flag: 1.
[ 1.090000] PPP generic driver version 2.4.2
[ 1.090000] PPP Deflate Compression module registered
[ 1.100000] PPP BSD Compression module registered
[ 1.100000] PPP MPPE Compression module registered
[ 1.110000] NET: Registered protocol family 24
[ 1.110000] PPPoL2TP kernel driver, V1.0
[ 1.120000] tun: Universal TUN/TAP device driver, 1.6
[ 1.120000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.130000] usbcore: registered new interface driver cdc_ether
[ 1.140000] usbcore: registered new interface driver rndis_host
[ 1.140000] Driver 'sd' needs updating - please use bus_type methods
[ 1.150000] SCSI Media Changer driver v0.25
[ 1.150000] Driver 'ch' needs updating - please use bus_type methods
[ 1.160000] Nationalchip SPINand Driver Registration
[ 1.170000] SPINAND: 0xd5, 0x11, EM73C044
[ 1.170000] Beagle-MTD_01.00_Linux2.6.33_20100507
[ 1.180000] [spinand_read_status2]reg:b0 data:10
[ 1.180000] [spinand_read_status3]reg:a0 data:00
[ 1.190000] 7 cmdlinepart partitions found on MTD device spi_nand
[ 1.200000] Creating 7 MTD partitions on "spi_nand":
[ 1.200000] 0x00000000-0x00020000 : "BOOT"
[ 1.210000] 0x00020000-0x00500000 : "KERNEL"
[ 1.290000] 0x00500000-0x00a00000 : "UPG"
[ 1.370000] 0x00a00000-0x01a00000 : "ROOTFS"
[ 1.450000] [00]block id 128 address 1000000 is bad.
[ 1.600000] 0x01a00000-0x02a00000 : "USER"
[ 1.810000] 0x02a00000-0x02b00000 : "LOGO"
[ 1.840000] 0x02b00000-0x08000000 : "DATA"
[ 2.510000] [00]block id 768 address 6000000 is bad.
[ 2.910000] [00]block id 1023 address 7fe0000 is bad.
[ 2.930000] Scanning device for bad blocks
[ 3.140000] Bad eraseblock 00128 at 0x01000000 ~ 0x01020000
[ 4.150000] Bad eraseblock 00768 at 0x06000000 ~ 0x06020000
[ 4.550000] Bad eraseblock 01023 at 0x07fe0000 ~ 0x08000000
[ 4.560000] Initializing USB Mass Storage driver...
[ 4.560000] usbcore: registered new interface driver usb-storage
[ 4.570000] USB Mass Storage support registered.
[ 4.580000] usbcore: registered new interface driver usbserial
[ 4.580000] usbserial: USB Serial support registered for generic
[ 4.590000] usbcore: registered new interface driver usbserial_generic
[ 4.590000] usbserial: USB Serial Driver core
[ 4.600000] usbserial: USB Serial support registered for cp2101
[ 4.610000] usbcore: registered new interface driver cp2101
[ 4.610000] cp2101: Silicon Labs CP2101/CP2102 RS232 serial adaptor driver v0
.07
[ 4.620000] usbserial: USB Serial support registered for debug
[ 4.630000] usbcore: registered new interface driver debug
[ 4.630000] usbserial: USB Serial support registered for FTDI USB Serial Devi
ce
[ 4.640000] usbcore: registered new interface driver ftdi_sio
[ 4.650000] ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
[ 4.650000] usbserial: USB Serial support registered for GSM modem (1-port)
[ 4.660000] usbcore: registered new interface driver option
[ 4.670000] option: USB Driver for GSM modems: v0.7.2
[ 4.670000] usbserial: USB Serial support registered for pl2303
[ 4.680000] usbcore: registered new interface driver pl2303
[ 4.680000] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 4.690000] i2c /dev entries driver
[ 4.700000] nc watchdog init success.
[ 4.700000] TCP cubic registered
[ 4.710000] NET: Registered protocol family 17
[ 4.710000] RPC: Registered udp transport module.
[ 4.720000] RPC: Registered tcp transport module.
[ 4.730000] [squashfs_next_good_block:195]Skipping bad block at 00600000 - 01
000000
[ 4.750000] VFS: Mounted root (squashfs filesystem) readonly.
[ 4.760000] Freeing unused kernel memory: 80k freed
[ 4.780000] Warning: unable to open an initial console.
[ 7.760000] UBI: attaching mtd6 to ubi0
[ 7.760000] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 7.770000] UBI: logical eraseblock size: 126976 bytes
[ 7.780000] UBI: smallest flash I/O unit: 2048
[ 7.780000] UBI: VID header offset: 2048 (aligned 2048)
[ 7.790000] UBI: data offset: 4096
[ 9.770000] UBI: attached mtd6 to ubi0
[ 9.770000] UBI: MTD device name: "DATA"
[ 9.780000] UBI: MTD device size: 85 MiB
[ 9.780000] UBI: number of good PEBs: 678
[ 9.790000] UBI: number of bad PEBs: 2
[ 9.790000] UBI: max. allowed volumes: 128
[ 9.790000] UBI: wear-leveling threshold: 4096
[ 9.800000] UBI: number of internal volumes: 1
[ 9.800000] UBI: number of user volumes: 1
[ 9.810000] UBI: available PEBs: 0
[ 9.810000] UBI: total number of reserved PEBs: 678
[ 9.820000] UBI: number of PEBs reserved for bad PEB handling: 6
[ 9.820000] UBI: max/mean erase counter: 2/0
[ 9.840000] UBI: background thread "ubi_bgt0d" started, PID 834
[ 9.860000] UBIFS: background thread "ubifs_bgt0_0" started, PID 836
[ 10.030000] UBIFS: recovery needed
[ 12.790000] UBIFS: recovery completed
[ 12.800000] UBIFS: mounted UBI device 0, volume 0, name "data"
[ 12.800000] UBIFS: file system size: 81899520 bytes (79980 KiB, 78 MiB, 645 L
EBs)
[ 12.810000] UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
[ 12.820000] UBIFS: default compressor: LZO
[ 12.820000] UBIFS: media format 4, latest format 4
[ 26.830000] firmware id = 0x0101 addr = c0382b20 size = 12288
[ 26.840000] firmware id = 0x0100 addr = c0385b40 size = 32768
[ 26.840000] firmware id = 0x0102 addr = c038db60 size = 16384
[ 26.850000] firmware id = 0x0103 addr = c0391b80 size = 12288
[ 26.860000] firmware id = 0x0104 addr = c0394ba0 size = 28672
[ 26.860000] firmware id = 0x0001 addr = c039bbc0 size = 358752
[ 26.870000] firmware id = 0x0006 addr = c03f3540 size = 91224
[ 26.870000] firmware id = 0x000a addr = c04099c0 size = 197192
[ 26.880000] gxav_devices_setup,chip_id : 0x3211 profile:00000000
[ 26.890000] as_type:00000000
[ 26.910000] gxav_module_init: ok!
[ 27.070000] hello, GPIO!
[ 27.750000] DVB: registering new adapter (gxdvb)
[ 27.750000] fe_profile.demod_type = 8
[ 27.750000] fe_profile.demod_i2c_id = 0
[ 27.760000] fe_profile.demod_chip_addr = 0xe4
[ 27.760000] fe_profile.tuner_type = 55
[ 27.770000] fe_profile.tuner_i2c_id = 0
[ 27.770000] fe_profile.tuner_chip_addr = 0x18
[ 27.790000] gx_i2c_open_dev(),find active i2c device,i2c_devid=0
[ 27.790000] gx_i2c_open_dev(),find active i2c device,i2c_devid=0
[ 27.800000] DVB: registering frontend 0 (Nationalchip GX3211 DVB-T2 S2)...
[ 28.030000] EHCI-NationalChip EHCI-NationalChip.0: EHCI-NationalChip
[ 28.050000] EHCI-NationalChip EHCI-NationalChip.0: new USB bus registered, as
signed bus number 1
[ 28.080000] EHCI-NationalChip EHCI-NationalChip.0: irq 59, io mem 0x00900000
[ 28.100000] EHCI-NationalChip EHCI-NationalChip.0: USB 0.0 started, EHCI 1.00
, driver 10 Dec 2004
[ 28.110000] usb usb1: configuration #1 chosen from 1 choice
[ 28.130000] hub 1-0:1.0: USB hub found
[ 28.130000] hub 1-0:1.0: 2 ports detected
[ 28.330000] ohci_hcd_gx_drv_probe, a00000.
[ 28.330000] OHCI-NationalChip OHCI-NationalChip.0: OHCI-NationalChip
[ 28.350000] OHCI-NationalChip OHCI-NationalChip.0: new USB bus registered, as
signed bus number 2
[ 28.350000] OHCI-NationalChip OHCI-NationalChip.0: irq 58, io mem 0x00a00000
[ 28.430000] usb usb2: configuration #1 chosen from 1 choice
[ 28.440000] hub 2-0:1.0: USB hub found
[ 28.440000] hub 2-0:1.0: 1 port detected
[ 28.570000] ohci_hcd_gx_drv_probe, b00000.
[ 28.570000] OHCI-NationalChip OHCI-NationalChip.1: OHCI-NationalChip
[ 28.590000] OHCI-NationalChip OHCI-NationalChip.1: new USB bus registered, as
signed bus number 3
[ 28.590000] OHCI-NationalChip OHCI-NationalChip.1: irq 57, io mem 0x00b00000
[ 28.670000] usb usb3: configuration #1 chosen from 1 choice
[ 28.680000] hub 3-0:1.0: USB hub found
[ 28.680000] hub 3-0:1.0: 1 port detected
[ 28.850000] Monitor Driver, (c) 2013 Technologies
run dvb app from tmp
run dvb app without msg
[ 38.790000] gx_otp_write: start: 0x348, size: 8.
[ 38.800000] gx_otp_write: start: 0x780, size: 128.
[ 38.810000] size 16KB num : 32
[ 38.810000] size 64KB num : 2
[ 38.810000] total num : 34
[ 38.820000] total size : 640KB
[ 38.820000] [0]ts pag buffer:97a00000
[ 38.820000] [0]tsd pag buffer:97b00000
[ 38.830000] [1]ts pag buffer:97a40000
[ 38.830000] [1]tsd pag buffer:97c00000
[ 38.840000] audio dec config type :3 mode : 0x3
[ 38.840000] Audio dec can not find 3 firmware.
[ 38.850000] xxxxaudio dec config type :3 mode : 0x2
[ 39.020000] MPEG: date 2018.06.05 ver 1.2.1.6
[ 39.030000] DRA: date 2017.02.13 ver 1.1.2.1
[ 39.030000] [gxav_device_open:266] 0 0 0
[ 39.040000] gx_otp_write: start: 0x354, size: 12.
[ 39.190000] video buffer size:5000000, at:18800000
[ 39.230000] ######EDID read audio, 1 ######
[ 39.560000] video buffer size:5000000, at:18800000
[ 39.570000] frambuffer size:2800000, at:1d800000.
[ 45.190000] synopGMAC_attach PhyBase: 1.